We have 7 fully stocked warehouse and showroom locations for pickup and orders by phone and email.
|
Corporate Office 131-02 Jamaica Avenue Richmond Hill, NY 11418 TEL: (718) 847-3400 FAX: (718) 805-9816 |
Wingdale Office 2108 Route 22 Wingdale, NY 12594 TEL: (845) 832-0100 FAX: (845) 832-0300 |
Medford Office 2058 Horse Block Road Medford, NY 11763 TEL: (631) 698-3000 FAX: (631) 698-3142 |
|
Garfield Office 112 Monroe Street Garfield, NJ 07026 TEL: (973) 472-5121 FAX: (973) 472-9260 |
Blackwood Office 560 South Black Horsepike Blackwood, NJ 08012 TEL: (856) 374-3004 FAX: (856) 374-3006 |
New England Office 40 Locke Drive Marlborough, MA, 01752 Phone 508-251-2820 Fax 508-251-1794 |
| New location: Boundary Fence of Rochester - for pickups only 495 Trabold Rd Rochester, NY 14624 |
||
PLIERS
DROP FORGED PLIERS
The most used tools in the Fence Industry. Made exclusively for fencing needs unconditionally guaranteed. Available with a round nose or square nose in an 8" or 10". Also available with a 24 karat gold plating for special gifts.
| CODE # | ITEM |   |
| T10 | 10"ROUND PLIERS | |
| T12 | 10" ROUND (VINYL HANDLE) | |
| T15 | 10" SQUARE PLIERS | |
| T30 | 8" ROUND PLIERS | |
| T35 | 8" SQUARE PLIERS |
24 CARATS GOLD PLATED PLIERS
(CERTIFICATE ON REQUEST)
Best gift for a staff or worker to show that you care.
| CODE # | ITEM |  |
| GOLD10 | 24 Karat Gold Plated PLIER. |
10" ALLIGATOR JAW PLIER
10" Alligator Jaw - vinyl coated handle for ease and operation. Used mostly in the mid west
| CODE # | ITEM |  |
| T40 | 10" ALLIGATOR JAWS |
11" UNIVERSAL PLIERS
11" universal pliers - widely used on farm fencing for removing staples on one side and as a hammer on the other side. There are two wire cutting edges and a wire puller in the center
| CODE # | ITEM |  |
| T35A | 11" UNIVERSAL PLIERS |
CARRIAGE BOLT PLIERS
(Gate Type Green --Field Type Brown/black)
These pliers are also called labor saver & are very easy to use.
Insert carriage bolt through the holes in the holes in the tension band or brace band, rest the round head part of the carriage bolt in the solid recessed or indented part of the end of the pliers. The carriage bolt goes through the open end of the pliers. Squeeze the pliers until the carriage bolt passes through the tension band or brace band, put nut on carriage bolt and tighten. Turn the nut until it touches the tension band or brace band. You do not need additional toll when using these pliers.
Gate model (green handle) ideal for use while stretching fabric to the gate frame.
Field model (brown handle) labor saver, one man operation for holding bolt in place.
 |
 |
 |
 |
| T135 - FIELD-MODEL EACH | T135 - FIELD-MODEL EACH |
LINESMAN PLIERS
8" LINESMAN PLIERS - USED ON 11 GAUGE STEEL.
10" LINESMAN PLIERS- USED ON 9 AND 6 GAUGE STEEL.
| T46 | 10" LINESMAN PLIERS |  |
9" HOG PLIER
MALLEABLE IRON PLIER CAN BE USED ON 11 GAUGE OR 9 GAUGE STEEL WITH EASE
| T40A | 9” Hog Ring Plier |  |
AUTOMATIC HOG RING PLIER
MALLEABLE IRON PLIER CAN BE USED ON 11 GAUGE OR 9 GAUGE STEEL WITH EASE
|
Do not break easily good for long run & frequent use. Capacity - 25 rings per strip Fasteners - 9 GA aluminum ring 09AL25 2500 per box Automatic feed - no more loading loose rings. Rings always in position for next fastening. Vinyl comfort grips - less fatigue, extended use. Big jobs or small |
 |
| AHRG | Hog Ring Plier |
| AHRG25 (fastener) | 2500 PCS/box |
MAASDAM POWER PULL
THIS IS CONSIDERED THE BEST POWER PULL ON THE FENCE MARKET TODAY. OVER THE YEARS WE HAVE SOLD ALL KINDS OF THEM, BUT OUR CUSTOMERS AND TRUCKS DRIVERS ALWAYS INSIST ON MAASDAM ONLY.
| T170 | 1 TON MAASDAM POWER PULL (3/16" CABLE) |  |
| T171 | 2 TON MAASDAM POWER PULL (3/16" CABLE) | |
| T195 | 1 TON MAASDAM POWER PULL | |
| T172 | REPLACEMENT CABLE 12' (1" WEB STRAP) | |
| T196 | REPLACEMENT STRAP 12' | |
| T173 | REPLACEMENT HOOK | |
| T174 | REPLACEMENT RATCHET | |
| T175 | REPLACEMENT HANDLE |
WIRE GRIP
Used in conjunction with the power pull to stretch barbed wire or coil spring wire.
| T110 | WIRE GRIP |  |
GIANT WIRE GRIP
Rated for 1500 LB capacity, but pulls even more when used along with MAASDAM POWER PULL
for stretching barbed wire, plain & coil spring.
| T112 | GIANT WIRE GRIP |  |
RUBBER MULE
Made of first grade Rubber Polymers. Available in 4 lengths- 15” thru 41” plus 2 1/2” Hooks. Hook pivots with straps and is permanently locked on both ends.
| CODE# | DESCRIPTION |  |
| T105 | 15” Rubber Mule | |
| T106 | 21” Rubber Mule | |
| T107 | 31” Rubber Mule | |
| T108 | 41” Rubber Mule |
FENCE FABRIC STRETCHER
Heavy duty construction. The body is 3/8” steel 1 1/4” wide for the 24” and 2” for the 42” and 52” stretcher. Use with the pull jack to stretch Fabric from 3' to 8' by one man, thus becoming a big labor cost saver.
| CODE# | DESCRIPTION |  |
| T85-24 | 24” Fence Stretcher | |
| T95-42 | 42” Fence Stretcher | |
| T100-52 | 52” Fence Stretcher | |
| T100-69 | 69” Fence Stretcher |
HAND STRETCHER
This hand stretcher is very useful for stretching gates and short stretches of fence. Always use two of them so as to stretch evenly.
| CODE# | DESCRIPTION |  |
| T145 | 1 3/8” Hand Stretcher | |
| T146 | 1 5/8” Hand Stretcher | |
| T147 | 2” Hand Stretcher | |
| T148 | 2 1/2” Hand Stretcher |
HEAVY HAND STRETCHER
The Heavy Duty hand stretcher wraps itself around the pipe thus giving more leverage. Hot dipped Galvanized. Need 2 pieces to stretch properly.
| CODE# | DESCRIPTION |  |
| T301 | 1 5/8” Heavy Hand Stretcher | |
| T302 | 2” Heavy Hand Stretcher | |
| T303 | 2 1/2” Heavy Hand Stretcher | |
| T304 | 3” Heavy Hand Stretcher | |
| T305 | 4” Heavy Hand stretcher |
WIRE STRETCHER
Used mostly for residential jobs in conjunction with the MAASDAM power pull
| T115 | Wire Stretcher |   |
PULL JACK
This is one of the best stretching tool ever made. Can be used for stretching, lifting and aligning chain link fence. Made of Malleable Iron and Heat-treated components. Has a 1000 LB capacity. Fits up to 3 1/2” diameter pipe. The deluxe model has a 4' arm designed to stretch 4' chain link in one pull. Deluxe pull jack has a 42” rake.
| CODE# | DESCRIPTION |
| T180 | Pull Jack |
| T181 | Pull Jack Deluxe |
| T182 | Pull Jack Rebuilding Kit |
    |
|
THE VERSATILE GOLDENROD
Fence Stretcher - Splicer Here the stretcher is shown performing one of its most important functions- Splicing. Note how the hooks are taking up slack from both ends of the wire and holding them in place, so both hands are free to make a splice. The ends are held firmly in place until the tension is released.
| T126 | GOLDEN ROD |  |
HAND STRETCHER
This tool stretches the barbed wire or coil spring drum tight with little effort.
| T125 | HAND STRETCHER |  |
EASY STRETCH (FOR BARBED WIRE)
Easy stretch - barbed wire stretching tool cuts fencing time drastically
| ES10 | Easy Stretch |  |
| NS | Non Slide Bar |
TURBO LEVEL
A unique tool used to raise the chain link to the proper height. Once secured your hands are free to install the ties.
| TL | Turbo level |  |
GATE CLIP TOOL
Gate Clip Tool - Malleable Iron, far superior than the pressed Steel. Always stays in line.
| T150 | Gate Clip Tool |  |
ADJUSTABLE WRENCH
Available in 8”, 10” and 12”
| T264 | 8” Adjustable Wrench |  |
| T265 | 10” Adjustable Wrench | |
| T266 | 12” Adjustable Wrench |
TRUSS ROD BENDER
Makes easy work out of bending 3/8” truss rods in the field or shop
| T152 | Truss Rod Bender |  |
DELUXE TWIST TOOL
(plastic handle spring return) - with 2 1/2” twists per pull. This tool is designed to give maximum pull strength with minimal effort.
| RRTW10 | Deluxe twist tool |  |
TWIST TOOL
(manual) - The original tying tool. Speed, ease of use, and economy make this tool our number one seller
| RRTW6 | Twist Tool |  |
| T200 | 8” TO 12” Deluxe hack saw |  |
| T202 | Hack saw blade |
BOW SAW
We suggest that if you handle wood you should have one bow fence in each truck.
| T100 | Bow saw |
| T226 | Razor coil gloves (PIC ON RIGHT) |  |
| T225 | Leather palm gloves (NO PIC...) | |
| T224 | Cotton glove filler (NO PIC...) | |
| THE PICTURE ABOVE IS ONLY FOR RAZOR COIL GLOVE OTHER GLOVE ARE NOT SHOWN IN THE PIC. | ||
CUTTING TOOLS
BAND CUTTER
Heat treated jaws; ideal tool for cutting the heavy straps holding the pipe, no need to ruin your telegraph bar.
| T200 | 8” TO 12” Deluxe hack saw |  |
| T190 | Band cutter |
PIPE CUTTER
We have been selling these pipe cutters since 1973 without any complaints.
| T160 | 2 1/2” Pipe Cutter |  |
| T162 | 4” Pipe Cutter | |
| T160A | 2 1/2” Replacement Blade | |
| T162A | 4' Replacement Blade |
COLLINS PIPE CUTTER
Replacement parts for Collins E-Z cutter available. Collins d ns cutter blade in stock.
| CB10 |  |
| Call for prices ON COMPLETE COLLINS MACHINE |
BOLT CUTTER
Available in sizes from 8” to 36”. They are a very versatile tool - used to cut wire or rods up to 1/2” thick. Replacement jaws are available
| CODE # | DESCRIPTION |  |
| T56 | 14” Bolt Cutter | |
| T57 | 18” Bolt Cutter | |
| T58 | 24” Bolt Cutter | |
| T63 | 30” Bolt Cutter |
18” PIPE WRENCH
A must to hold pipe when cutting it with the pipe cutter.
| T155 | 18” Pipe Wrench |  |
| T191 | GUARD RAIL WRENCH |  |
MEASURING TOOLS
STEEL MEASURE
One of the very important tolls which we all are aware of. A must for worker on & off the field.
| T291 | 25' X 1” Steel tape |  |
FIBERGLASS TAPE
DO NOT BREAK EASILY GOOD FOR LONG RUN & FREQUENT USE
| T286 | 50' Fiberglass tape |  |
| T287 | 100' Fiberglass tape |
- A precision recording counter computes measurements with efficiency. Scientifically calibrated wheels are rimmed with tough neoprene hard rubber to ensure solid traction.
- Easy to use. Just walk with wheel on ground to measure.
- Can measure just as easily around curves or over contours as on straight lines.
- The measurements can be seen while you are walking & there is no need to wind & unwind as in tapes.
| T205 | 12” Measuring wheel |  |
| T210 | 4” Measuring wheel |
| CODE# | DESCRIPTION |
| T191 | 18" PROTRACTOR |
| T192 | 36" PROTRACTOR |
| T193 | 72" PROTRACTOR |
 |
|
NOTCHING TOOLS
NOTCHING TOOL
used on 100% vinyl everlasting fences to make an elevation at the end of each rail prior to insertion into post. Jaws furnished with 18” bolt cutter. Notch is 3/4” wide.
| NT10 | Notching Tool |  |
| RNT10 | Replacement Blade | |
 |
||
ECONO ARC-FIT HAND NOTCHER
To notch 1 3/8”, 1 5/8”, & 2” fence designation tubing. All hardened tool steel cutting members. Different punches for each size. Change over time less than 2 minutes. One tool complete & ready to use.
| NT10 | Notching Tool |  |
| HN | Hand Notcher |
LOWBUCK NOTCHER
The Williams Lowbuck Notcher features patented upper and lower ram supports and heat-treated tool steel cutters for long life and smooth action. It includes cutters for each size...1 3/8”, 1 5/8”, 1 7/8”.
| NT10 | Notching Tool |  |
| LN10 | Lowbuck Notcher |
| 1400 | Hand press |  |
| 1401 | Arc fit housing | |
| 1402 | Assembly for 1 3/8” O.D. pipe | |
| 1403 | Assembly for 1 5/8” O.D. pipe | |
| 1404 | Assembly for 2” O.D. pipe | |
| 1405 | Stand | |
| 1406 | Assembly for 2 1/2” OD pipe | |
| 1407 | Stand |
SILVER SPRAY
Silver spray - used to touch up welds to prevent rusting.
Also used to cover over graffiti on corrugated metal.
| T224 | Silver Spray |  |
| Silver Spray - 120 or more |
SLEDGE HAMMER
Double-faced sledge hammer made of heat-treated steel for long life, hickory wood handle will last a lifetime
| T258 | 12 LB Sledge hammer |  |
| T259 | 16 LB Sledge hammer | |
| T260 | 20 LB Sledge hammer | |
| T261 | Sledge hammer handle |
VISE GRIP
Double-faced sledge hammer made of heat-treated steel for long life, hickory wood handle will last a lifetime
MAGNETIC LEVEL
9” Stanley magnetic level. A must for the trade. Easy to read and accurate
| T70 | MAGNETIC LEVEL |  |
RATCHET STRAP
This 10,000 LB capacity ratchet strap measures 2” wide X 27' long. It features a steel hook on the end and is recommended for heavy duty loads
| T282 | Ratchet strap |
RAIN SUIT (3 PCS)
Yellow in color for visibility, yet economical. Available in 5 sizes:
| T299 | Large Rainsuit |  |
| T300 | Extra large Rainsuit |
RHINO AIR OPERATED POST DRIVERS
LOW COST EFFICIENT TROUBLE -FREE OPERA TION
APPLICATION & SPECIFICATION
Easily operated by one man, it delivers up to 1700 blows per minute. One moving part. A reciprocating piston Strikes directly on the post or driving adapter. The drivers have low air consumption rates & are light weight and hand portable. Ideal For driving in places that are hard to reach. All you need is enough air capacity. Be sure to use the filter regulator lubricator to assure clean air, plus ten drops of oil per minute, and your RHINO post driver will give you fast, low cost driving. Alloy steel positions and other features Insure little or no maintenance.
| Model PD-39 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 70006 | PD-39 Heavy duty post driver includes 3-5/8” (92 mm) Master Chuck | |
| 70330 | PD.39 3" (76.2 mm) Chuck. Adapter | |
| 70320 | PD-39 2 ½” (63.5 mm) Chuck Adapter | |
| 70319 | PD-39 2” (50.8 mm) Chuck Adapter | |
| 70334 | PD-39 Channel Post Chuck Adapter | |
| 70337 | PD-39 Channel Post Chuck Adapter | |
| 70338 | PD-39 Channel Post Chuck Adapter | |
| Model PD-39P | ||
 |
||
| PART NO. | DESCRIPTION | |
| 70016 | PD-39P Panel Post Driver includes 2-1/8"(53.98 mm) Master Chuck | |
| MODEL PD-45 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 70012 | PD-45 Light Duty Post Driver includes 3” (76.2 mm) Master Chuck | |
| 70600 | PD-45 2-1/2" (63.5 mm) Chuck Adapter | |
| 70601 | PD-45 2” (50.8 mm) Chuck Adapter | |
| 70602 | PD-45 1- ½” (38.1 mm) Chuck Adapter | |
| 70603 | PD-45 1”(25.4 mm} Chuck Adapter | |
| 70606 | PD-45 Channel Post Adapter | |
| MODEL PD-55 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 70013 | PD-55 Medium Duty Post Driver includes 3 7/8” (98.4 mm) Master Chuck | |
| 70609 | PD-55 3-1/2” (88.9 mm) Chuck Adapter | |
| 70610 | PD-55 3'”(76.2 mm) Chuck Adapter | |
| 70611 | PD-55 2-1/2” (63.5 mm) Chuck Adapter | |
| 70612 | PD-55 2” (50.8 mm) Chuck Adapter | |
| 70613 | PD-55 1-1/2” (38.1 mm) Chuck Adapter | |
| 70614 | PD-55 1”(25.4 mm) Chuck Adapter | |
| 70617 | PD-55 Channel Post Adapter | |
| 70618 | PD-55 Channel Post Chuck Adapter | |
| 70619 | PD-55 Channel Post Chuck Adapter | |
| MODEL PD-100 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 70014 | PD-100 Medium/Heavy Duty Post Driver includes 4 1/4” (107.9 mm) Master Chuck | |
| 70622 | PD-100 3-5/8” (92 mm) Chuck Adapter | |
| 70623 | PD-100 3'”(76.2 mm) Chuck Adapter | |
| 70624 | PD-100 2-1/2” (63.5 mm) Chuck Adapter | |
| 70625 | PD-100 2” (50.8 mm) Chuck Adapter | |
| 70628 | PD-100 Channel Post chuck Adapter | |
| 70629 | PD-100 Channel Post chuck Adapter | |
| 70630 | PD-100 Channel Post chuck Adapter | |
| MODEL PD-140 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 70015 | PD-140 Heavy duty post driver includes 4-1/4” (107.9 mm) Master Chuck | |
| 70634 | PD-140 3-5/8” (92 mm) Chuck Adapter | |
| 70635 | Pd-140 3”(76.2 mm) Chuck adapter | |
| 70636 | PD_ 140 2-1/2” (63.5 mm) Chuck Adapter | |
| 70061 | 4” x 6” (101 mm x 152 mm)H column chuck | |
| 70063 | 4” x 6” (101 mm x 52 mm) H column chuck | |
| 70640 | PD-140 Channel Post Chuck Adapter | |
| 70641 | PD-140 Channel Post Chuck Adapter | |
| 70642 | PD-140 Channel Post Chuck Adapter | |
| 70015 | PD-140 Heavy duty post driver includes 4-1/4” (107.9 mm) Master Chuck | |
| MODEL PD-140 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 71012 | MP-3 Manual Post Puller (includes Post Grabber and chain) | |
| 71040 | Post Grabber | |
| 71041 | Panel Post Grabber | |
| 220422 | MP-3 chain assembly | |
| MODEL PL-3 | ||
 |
||
| PART NO. | DESCRIPTION | |
| 71000 | Pl-3 Post Puller | |
| 71040 | Post Grabber | |
| 71041 | Panel Post Grabber | |
| ACCESSORIES | ||
 |
||
| 100047 | Air Hose Reel with 100’ Hose | |
| 100295 | Air Hose Reel Only | |
| 100048 | 100 Foot Air Hose Assembly | |
| 225000 | Carrier for Filter – Regulator –Lubricator | |
| 600000 | Throttle Valve kit | |
| 607000 | Hose Assembly | |
| $25.00 includes assembly labor and all parts except hose. Add $2.50 PER FOOT length of hose needed. For example: 1 foot assembly - $25.00 plus $2.50 – total $27.50. 10 foot hose assembly - $25.00 plus (10ft. x $2.50) $25.00 – total $50.00. | ||
| 601128 | Filter-Regulator-Lubricator | |
| 605006 | Extra 3/4” (19mm) Air Hose /ft | |
| 606600 | Air Line Coupler | |
| 606601 | Coupler Safety Clip | |
| 610026 | Throttle Valve only w/lever Guard | |
| 995051 | Anti-Vibration Gloves – Small | |
| 995052 | Anti-Vibration Gloves – Medium | |
| 995053 | Anti-Vibration Gloves – Large | |
| 995054 | Anti-Vibration Gloves – X Large | |
| 995055 | Anti-Vibration Gloves – XX Large | |
| POST HOLE DIGGERS | ||
 |
||
| ECONOMY |
WOLVERINE |
SUPREME |
|
|
|
|
PH30 --- /PCS 4PCS+ ---- /PCS |
PH20 --- $ /PCS 4PCS+ ----$ /PCS |
PH20 ----- $ /PCS 4PCS+ ----- $ /PCS |
| POST HOLE DIGGER TAMPING BAR | |
| Best tool to use when installing wood fences - 72” long | |
| T278 | Post hole digging bar |
 |
|
| TELEGRAPH DIGGING BAR | ||
  |
||
| T275 | 1” X 72” Digging Bar | |
| T276 | 1 1/8” X 72” Digging Bar | |
| T277 | 1 1/4” X 96” Digging Bar | |
| POST DRIVER | ||
| Used to push post into the ground for snow fence, yard guard & farm fence post. One size fits up to 3” OD post. | ||
| T271 | driver |  |
| SHOVELS | ||
 |
||
| T220 | Short square wood handle | |
| T218 | Short point wood handle | |
| T216 | Long point wood handle | |
| SHOVELS |  |
|
| Please call for prices | ||
| H500 | 5 Horse Power | |
| H700 | 8 Horse Power | |
| H 10 | 11 Horse Power Hydraulic One man handle | |
| H112 | 11 Horse Power Hydraulic Two man handle | |
| SNAP-ON AUGERS |  |
|
| Please call for prices | ||
| H642 | 6” X 42” Snap-on-auger | |
| H842 | 8” X 42” Snap-on-auger | |
| H6 | 6” Blade | |
| H642 | 8” Blade | |
| CT6 | 6” Carbide Tip | |
| CT8 | 8” Carbide Tip | |
Pliers
- Drop Forged Pliers
- 24k Gold Plated Pliers
- Alligator Jaw Pliers
- Universal Pliers
- Carriage Bolt Pliers
- Linesman Pliers
- Hog Pliers
- Automatic Hog Ring Pliers
Fence Stretching Tools
- Ratchet Stretcher
- Maasdam Power Pull
- Wire Grip
- Giant Wire Grip
- Rubber Mule
- Fence Fabric Stretcher
- Hand Stretcher
- Heavy Duty Hand Stretcher
- Wire Stretcher
- Pull Jack
- Versatile Golden Rod
- Stretcher (Barb Wire)
- Easy Stretcher (Barb Wire)
Notching Tools
Cutter
Wrench
Diggers
Miscellaneous
- Gate Clip tool
- Truss Rod Bender
- Deluxe Twist Tool
- Hack Saw & Blade
- Bow Saw
- Turbo Level
- Twist Tools
- Razor Coil Gloves
- Steel Measuring Tape
- Fibre Glass Tape
- Rolatape Measuring
- Proctractor
- Sledge Hammer
- Vise Grip
- Magnetic Level
- Ratchet Strap
- Silver Spray
- Rain Suit
